[cisco-voip] ISDN PRI - Message not compatible with call state...

[Jonathan Charles]

Actually, on the PRI debugs, I am not seeing any calling name info...


Jonathan

On 6/4/07, Vince Loschiavo <VLoschiavo at data-corporation.com> wrote:
> Not necessarily.
>
> Sometimes this is call manager not accepting the Caller-ID names.
>
> ____________________________________________________________
> Vincent Loschiavo
> Senior Consultant
> Datacorp
> 18503 Pines Blvd, Suite 212, Pembroke Pines, FL, 33029
> "Cisco Advanced Unified Communications Partner"
> Cell Phone:        786-282-1164
> Office Phone:    305-594-6933
> ____________________________________________________________
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
> Charles
> Sent: Wednesday, May 30, 2007 4:57 PM
> To: ciscovoip
> Subject: [cisco-voip] ISDN PRI - Message not compatible with call
> state...
>
> Getting a message on PRI debugs, just wondering if it is something to
> be concerned about:
>
>       Cause i = 0x80E56E - Message not compatible with call state
>
> Cisco's website says this for this code:
>
> The remote equipment receives an expected message that does not
> correspond to the current state of the connection.
>
> This issue occurs due to a D-channel error.
>
>
> Is this bad???
>
> the call connects...
>
>
>
> Jonathan
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>