[cisco-voip] outbound faxing issues

[Voll, Scott]

Check the faxes are running G3 (14.4) not Super G3 (33.6).  make sure
ECM (error correction Mode) is off.

 

On VGW's make sure they are set to Fax passthrough.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Monday, June 04, 2007 2:32 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] outbound faxing issues

 

we are sending faxs outbound and they are all getting disconnected.
incomming faxes are fine.  we are runing CM (mgcp) with fxo 4port card.
i not sure what to look at for fax. up until now they all just work if
mgcp was config correctly.

 

James Grace 

 

Systems Engineer

Adcap Network Systems, Inc.

6865 Shiloh Road East, Suite 250

Alpharetta, GA 30005

 

office: 678-456-6986

direct: 678-456-6761

jgrace at adcapnet.com

www.adcapnet.com <http://www.adcapnet.com/> 

Disclaimer For ADCAP Network Systems
 
"The information transmitted is intended only for the person or entity
to which it is addressed and may
contain confidential and/or privileged material. Any review,
retransmission, dissemination or other use of,
or taking of any action in reliance upon this information by persons or
entities other than the intended
recipient is prohibited. If you received this message in error, please
contact the sender and delete the
material from all computers."
 
This original email was sent to the internet for delivery at 04 Jun 2007
17:32:01 -0400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070604/b6fffbab/attachment.html