[cisco-voip] CCM4.1 AD Integrated, upgrade to 5...

[Jonathan Charles]

It turned out two users did not have first and last names and were
causing it to fail...

However, the TAR file is only 15MB.... shouldn't it be about the same
size as the backup? or at least close to?



Jonathan

On 6/26/07, Ryan Ratliff <rratliff at cisco.com> wrote:
> Is that from installdbw1.log or another log file?  Validation errors
> should be in installdbw1.log.
>
> The domain name for the server is My Computer->Properties, Network
> Identification->Properties->More.
>
> -Ryan
>
> On Jun 25, 2007, at 7:03 PM, Jonathan Charles wrote:
>
> Here is the error message:
>
> [03:55:54 PM]   [03:55:27 PM]   --- Begin Consolidating Logs (Phase 4
> of 5)
> [03:55:55 PM]   [03:55:37 PM]   --- End -- Load, Transform, and
> Validate CCM Database
> [03:55:55 PM]   Failure, Windows-based W1 Migration Verification
> [03:56:25 PM]   [Error] modExportDatabase=Failure
> [03:56:25 PM]   [Error] Could not complete database processing
> successfully.
> [03:56:25 PM]   [Error] Failed to verify Cisco CallManager database
> and directory backed up data.
> [03:56:25 PM]   [Error] The database and/or directory cannot be
> migrated as they are.
> [03:56:25 PM]   [Error] Correct the database and/or directory
> information and run DMA again.
> [03:56:25 PM]   [Error] Verification of DB in IDS failed. Retaining
> the TAR file as it is.
> [03:56:25 PM]
> [03:56:25 PM]   Backup information file DMABackupInfo.inf saved to D:
> \DMA.
>
> It never even attempts to validate.
>
>
>
> Jonathan
>
> On 6/25/07, Jonathan Charles <jonvoip at gmail.com> wrote:
> > Because that is what the error message in the DMA log says....
> >
> > How do you add the FQDN to the box without adding it to the domain?
> >
> >
> >
> > Jonathan
> >
> > On 6/25/07, Ryan Ratliff <rratliff at cisco.com> wrote:
> > > Ick, adding servers to the domain is such a pain in the butt.
> > >
> > > I'm not sure why DMA is failing.  You can set the FQDN of the server
> > > to anything you wish, regardless of whatever domain/workgroup the
> > > server belongs to.
> > >
> > > What leads you to the conclusion of a hostname mismatch causing the
> > > DMA to fail?
> > >
> > > -Ryan
> > >
> > > On Jun 25, 2007, at 3:32 PM, Jonathan Charles wrote:
> > >
> > > So, in the past, I build a new server, restore the backup to it and
> > > run DMA
> > >
> > > DMA fails cuz a hostname mismatch.
> > >
> > > Cuz it's not on the domain... of course, I can't join it, cuz the
> > > existing PUB is there...
> > >
> > > So, I have to run DMA on an old crappy server...
> > >
> > > Wondering, anyone else run into this and know of a workaround...?
> > >
> > >
> > >
> > > Jonathan
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> >
>