[cisco-voip] call-manager-fallback wrong phone dn

[Jonathan Charles]

Post the entire config... It almost seems like you have a bunch of
ephone-dn's on the router and it is auto-assigning them...



Jonathan

On 10/12/07, Benjamin Kappauf <benjamin.kappauf at googlemail.com> wrote:
> Benjamin Kappauf schrieb:
> > What is the problem if in case of a fallback all my phones are
> > registered fine to the voice router. But all phones don't get the
> > correct DN. Most of them get a 65xx DN. A few are with ext. mobility
> > activ. And they all have got DNs out of 4440 - 4449
> >
> > Btw. no 65xx number exist on the callmanager.
> >
> > Thanks alot for any help!
> >
> >
> > ----------------------------------
> > call-manager-fallback
> >   secondary-dialtone 9
> >   max-conferences 8 gain -6
> >   transfer-system full-consult
> >   ip source-address x.x.x.x port 2000
> >   max-ephones 40
> >   max-dn 80 dual-line
> >   system message primary SRST Fallback
> >   system message secondary SRST
> >   time-format 24
> >   date-format dd-mm-yy
>
> Today I downgraded the voice gateway to
> c2800nm-spservicesk9-mz.124-9.T5.bin and I did a reset on all phones.
>
> Afterwards I initialised SRST. But I still get the wrong DNs.
>
> What cause a phone on fallback to get a wrong dn?
>
> Thank you
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>