[cisco-voip] Called Party Number is blank....

[Jason Aarons (US)]

Fax 954-851-1946
Inbound H323 PSTN 2811 172.16.10.10

Outbound H323 Castelle 3825 172.16.315

Fax Press doesn't get that call was for 1946 due to Called Party Number
is blank.....but how did IOS know to route 1946 to fax press port
properly?


089849: Oct 29 14:03:42.840 EDT: ISDN Se0/3/0:23 Q931: Applying typeplan
for sw-type 0x3 is 0x2 0x1, Calling num 9043383245
089850: Oct 29 14:03:42.840 EDT: ISDN Se0/3/0:23 Q931: Applying typeplan
for sw-type 0x3 is 0x4 0x1, Called num 
089851: Oct 29 14:03:42.840 EDT: ISDN Se0/3/0:23 Q931: TX -> SETUP pd =
8  callref = 0x0087 
        Bearer Capability i = 0x8090A2 
                Standard = CCITT 
                Transfer Capability = Speech  
                Transfer Mode = Circuit 
                Transfer Rate = 64 kbit/s 
        Channel ID i = 0xA98381 
                Exclusive, Channel 1 
        Calling Party Number i = 0x2183, '9043383245' 
                Plan:ISDN, Type:National 
        Called Party Number i = 0xC1 
                Plan:ISDN, Type:Subscriber(local)
089852: Oct 29 14:03:42.852 EDT: ISDN Se0/3/0:23 Q931: RX <- CALL_PROC
pd = 8  callref = 0x8087 
        Channel ID i = 0xA98381


-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.