[cisco-voip] About Cisco 3845 GW

[tele]

For the media flow-around support you need at least the 12.4(9)T ios
version.

Read the Cisco Unified Border Element FAQ:

http://www.cisco.com/en/US/products/sw/voicesw/ps5640/products_qanda_item09186a00801da69b.shtml

:tele

On Mon, 2007-09-10 at 11:42 +0300, Servet ERKUN wrote:
> Hi , we hava cisco 3845 Router with
> c3845-adventerprisek9-mz.124-16.bin ios, and we use it for session
> border controller , there is two dial-peer for incoming and outgoing
> call legs, but it can not route RTP media flow-around and gets no
> resource cause (47)
> 
> 
> 
> Here is the dial-peers configurations
> 
> Is there any one have an idea about that??
> why it can not work flow-around?? 
> 
> 
> dial-peer voice 21 voip
> 
>  destination-pattern 777T
> 
>  media flow-around
> 
>  voice-class codec 1
> 
>  session protocol sipv2
> 
>  session target ipv4:212.XXX.0.XXX:5060
> 
>  dtmf-relay rtp-nte
> 
>  fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback
> pass-through g711alaw
> 
>  no vad
> 
> !
> 
> dial-peer voice 23 voip
> 
> media flow-around
> 
>  voice-class codec 1
> 
>  session protocol sipv2
> 
>  incoming called-number 777T
> 
>  dtmf-relay rtp-nte
> 
>  fax protocol t38 ls-redundancy 0 hs-redundancy 0 fallback
> pass-through g711alaw
> 
>  no vad
> 
>  
> 
>  
> 
>  
> 
> servet
> 
>  
> 
>  
> 
>  
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip