[cisco-voip] How to alert on PRI capacity?

[Ryan West]

Jonathan,

We use cacti to monitor the PRI usage and you could use a plugin, like thold, to alert on the thresholds.

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Madziarczyk, Jonathan
Sent: Wednesday, April 02, 2008 12:05 PM
To: Cisco Voyp List
Subject: [cisco-voip] How to alert on PRI capacity?

Hey all,

  I'm trying to find a way to set up an alert to notify me when my PRI fills up.  I've never found anything like this in CCM, but I'm guessing there's a way to do it with SNMP (We use OpenNMS for monitoring).  Essentially a warning when the PRI is 90% full or an error when it's 100%.

Has anyone already attempted this before, or have any ideas on how to make this a reality?

Currently using 2821's with T1 cards running MGCP.

Thanks,
JM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080402/95c8b241/attachment-0001.html