[cisco-voip] Convert SIP ATA back to SCCP

[Adam]

The load on the CCM is already set to SCCP. This ATA has not been registered
to CCM - the customer is not sure where it came from or why it has a SIP
load.

-Adam

On Wed, Apr 2, 2008 at 10:19 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> Just change the load on CCM to SCCP and then point the ATA to the CCM
> Publisher...
>
>
>
> Jonathan
>
> On Wed, Apr 2, 2008 at 9:45 PM, Adam <cisco at adman.net> wrote:
> > Anyone have a link to a document that describes this process? I can't
> find
> > details on how to move from SIP back to SCCP.
> >
> > Thanks,
> > Adam
> >
> > _______________________________________________
> >  cisco-voip mailing list
> >  cisco-voip at puck.nether.net
> >  https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080402/c31e7007/attachment-0001.html