[cisco-voip] silly qs: change pri time slot

[Daniel Rodriguez]

Shutdown the voice-port for your PRI.

conf t
voice-port 0/1/0:15
shut

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali
Sent: Thursday, April 03, 2008 3:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] silly qs: change pri time slot

hi

previously we had a 32 channel dsp card. we had one pri and a four port fxo card. when i configured the pri group time slots it told me that maximum can be 28 as enough dsp resources not available.

recently we installed another pri and another dsp but i tried to change the time slot to 31 on first pri it told me to shutdown the voice interface card.

I tried shutting down the controller as well as the logical serial interface but in vain. below is the configration script:

network-clock-participate wic 1
!
controller E1 0/1/0
 shutdown
 framing NO-CRC4
 pri-group timeslots 1-28  <-- need to change to 31
!
controller E1 0/1/1
 framing NO-CRC4
 pri-group timeslots 1-31
!
interface Serial0/1/0:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable
!
interface Serial0/1/1:15
 no ip address
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable


Regards,

Syed Khalid Ali

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080403/7ce5381f/attachment.html