[cisco-voip] UserID when syncing via ldap.. Removingcertaincharacters?

[James Buchanan]

That's great to know! Thanks for sharing that. I'll be looking for that!

-----Original Message-----
From: Ryan West [mailto:rwest at zyedge.com] 
Sent: Friday, April 04, 2008 8:59 AM
To: James Buchanan; Ryan Ratliff; MILLS, Mark
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] UserID when syncing via ldap..
Removingcertaincharacters?

James,

When you create the LDAP directory, there is a drop down to change the
telephone number field to IPphone.  I just verified it's working in
6.1(1) with a fresh sync.

-ryan

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Buchanan
Sent: Friday, April 04, 2008 9:48 AM
To: Ryan Ratliff; MILLS, Mark
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] UserID when syncing via ldap.. Removing
certaincharacters?

You can't map the IPPhone attribute in UCM for LDAP sync. I've heard
that complaint a lot.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Friday, April 04, 2008 8:38 AM
To: MILLS, Mark
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] UserID when syncing via ldap.. Removing
certaincharacters?

Not that I'm aware of.  Would it be possible to populate the IPPhone
attribute for your users with the number you wish CM to use and then
map that attribute instead of telephoneNumber?

-Ryan

On Apr 4, 2008, at 1:07 AM, MILLS, Mark wrote:

Hi,

We are doing Active Directory syncing for CallManager 6 users.

We use the telephoneNumber ldap attribute to map to the User ID field in
CCM, but in AD want to use the full international format such as
"+61(0)884807702" for numbers.

This is obviously a bit horrible for users to enter via their phone, is
there any way possible that we can have it selectively strip out the
+61(0) part of the number when creating the synced User ID's???   Ie, so
the login for the above number would actually be 884807702 ?

I have had a hunt around, and cant seem to find anything about doing
this, so I am assuming its not possible?  :(

Thanks,
    Mark
"Warning:
The information contained in this email and any attached files is
confidential to BAE Systems Australia. If you are not the intended
recipient, any use, disclosure or copying of this email or any
attachments is expressly prohibited.  If you have received this email
in error, please notify us immediately. VIRUS: Every care has been
taken to ensure this email and its attachments are virus free,
however, any loss or damage incurred in using this email is not the
sender's responsibility.  It is your responsibility to ensure virus
checks are completed before installing any data sent in this email to
your computer."


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip