[cisco-voip] Subscriber refusing to join cluster

[Louis Koekemoer (ZA)]

Sorry, I forgot to mention it is CCM5.1(3)


Kind Regards

Louis Koekemoer
Cisco IPT Systems Engineer
Dimension Data South Africa
  +27 11 575 6560
+  +27 76 608 7221
 louis.koekemoer at za.didata.com


-----Original Message-----
From: Frazee, Timothy [mailto:Timothy_Frazee at adp.com]
Sent: 06 April 2008 02:44 PM
To: Louis Koekemoer (ZA); Jonathan Charles
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Subscriber refusing to join cluster

I think Jonathan meant to add and entry to either
winnt/system32/drivers/etc/hosts or windows/system32/drivers/etc/hosts

Assuming you have a 3.x or 4.x server.

You didn't tell anyone what flavor of callmanager your working with.


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Louis Koekemoer
(ZA)
Sent: Sunday, April 06, 2008 10:33 PM
To: Jonathan Charles
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Subscriber refusing to join cluster

Hi Jonathan,

But if the Subscriber is not fully installed, how can I add a hostname
for Publisher on it? What I have done is on the Publisher I after the
2nd attempt, I removed subscriber totally, reloaded Publisher, and added
the subscriber on the hostname, and I also added another entry on the IP
address. This obviously was also not successful. The thing is just that
I have done this before, and it was so easy. I really suspect some
network or hardware issue here. I'm trying to locate another server to
try and eliminate the server hardware as a possibility.


Kind Regards

Louis Koekemoer
Cisco IPT Systems Engineer
Dimension Data South Africa
  +27 11 575 6560
+  +27 76 608 7221
 louis.koekemoer at za.didata.com

-----Original Message-----
From: Jonathan Charles [mailto:jonvoip at gmail.com]
Sent: 06 April 2008 02:25 PM
To: Louis Koekemoer (ZA)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Subsciber refusing to join cluster

Add a hosts entry on both to each other.


Jonathan

On Sun, Apr 6, 2008 at 5:06 AM, Louis Koekemoer (ZA)
<Louis.Koekemoer at za.didata.com> wrote:
>
>
>
>
> I need help on adding a subscriber server to a cluster. I did create
the
> subscriber on the Publisher, and after some time installing
subscriber, at
> the point of joining to Publisher I get the following message "The
> configuration validation with ZAMDH06056 (xxx.xxx.xxx.xxx.) failed.
The
> server could not send /receive UDP packets to the Publisher on port
8500. Is
> network connection to ZADMH06056 up? Is the MTU size correct for this
> network? Does the network allow packet fragments?" We can ping this
server
> from the voice VLAN, and I can ping Subscriber IP from Publisher, so
we
> don't think we have network connectivity issues here.
>
>
>
> Kind Regards
>
>
>
> Louis
>
>
>
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
> _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
This email and all contents are subject to the following disclaimer:

"http://www.dimensiondata.com/emaildisclaimer.htm"