[cisco-voip] Subscriber refusing to join cluster
Jonathan Charles
jonvoip at gmail.com
Sun Apr 6 13:14:45 EDT 2008
Well, during the install, the server will query DNS for itself... It
doesn't hurt to enter a DNS entry (or skip the DNS client config all
together...)
Jonathan
On Sun, Apr 6, 2008 at 12:01 PM, Louis Koekemoer (ZA)
<Louis.Koekemoer at za.didata.com> wrote:
> Yip, the are on the same subnet, same 6500 switch. Publisher is x.x.x.10 and subscriber x.x.x.11. I see Chris mentioned that DNS is required in 6.x. I don't know if this is applicable to 5.x as well. I cannot remember that I had to do this the previous time I've done this, but will give it a go as soon as I can.
>
>
>
> Kind Regards
>
> Louis Koekemoer
> Cisco IPT Systems Engineer
> Dimension Data South Africa
> +27 11 575 6560
> + +27 76 608 7221
> louis.koekemoer at za.didata.com
>
>
> -----Original Message-----
> From: Jonathan Charles [mailto:jonvoip at gmail.com]
>
> Sent: 06 April 2008 04:08 PM
> To: Louis Koekemoer (ZA)
>
>
> Cc: Frazee, Timothy; cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Subscriber refusing to join cluster
>
> See, that part helps.
>
> OK, are these two on the same subnet? Are they separated by a firewall?
>
>
>
> Jonathan
>
> On Sun, Apr 6, 2008 at 8:29 AM, Louis Koekemoer (ZA)
> <Louis.Koekemoer at za.didata.com> wrote:
> > Sorry, I forgot to mention it is CCM5.1(3)
> >
> >
> >
> > Kind Regards
> >
> > Louis Koekemoer
> > Cisco IPT Systems Engineer
> > Dimension Data South Africa
> > +27 11 575 6560
> > + +27 76 608 7221
> > louis.koekemoer at za.didata.com
> >
> >
> > -----Original Message-----
> >
> > From: Frazee, Timothy [mailto:Timothy_Frazee at adp.com]
> > Sent: 06 April 2008 02:44 PM
> > To: Louis Koekemoer (ZA); Jonathan Charles
> > Cc: cisco-voip at puck.nether.net
> >
> >
> > Subject: RE: [cisco-voip] Subscriber refusing to join cluster
> >
> > I think Jonathan meant to add and entry to either
> > winnt/system32/drivers/etc/hosts or windows/system32/drivers/etc/hosts
> >
> > Assuming you have a 3.x or 4.x server.
> >
> > You didn't tell anyone what flavor of callmanager your working with.
> >
> >
> > -----Original Message-----
> > From: cisco-voip-bounces at puck.nether.net
> > [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Louis Koekemoer
> > (ZA)
> > Sent: Sunday, April 06, 2008 10:33 PM
> > To: Jonathan Charles
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] Subscriber refusing to join cluster
> >
> > Hi Jonathan,
> >
> > But if the Subscriber is not fully installed, how can I add a hostname
> > for Publisher on it? What I have done is on the Publisher I after the
> > 2nd attempt, I removed subscriber totally, reloaded Publisher, and added
> > the subscriber on the hostname, and I also added another entry on the IP
> > address. This obviously was also not successful. The thing is just that
> > I have done this before, and it was so easy. I really suspect some
> > network or hardware issue here. I'm trying to locate another server to
> > try and eliminate the server hardware as a possibility.
> >
> >
> > Kind Regards
> >
> > Louis Koekemoer
> > Cisco IPT Systems Engineer
> > Dimension Data South Africa
> > +27 11 575 6560
> > + +27 76 608 7221
> > louis.koekemoer at za.didata.com
> >
> > -----Original Message-----
> > From: Jonathan Charles [mailto:jonvoip at gmail.com]
> > Sent: 06 April 2008 02:25 PM
> > To: Louis Koekemoer (ZA)
> > Cc: cisco-voip at puck.nether.net
> > Subject: Re: [cisco-voip] Subsciber refusing to join cluster
> >
> > Add a hosts entry on both to each other.
> >
> >
> > Jonathan
> >
> > On Sun, Apr 6, 2008 at 5:06 AM, Louis Koekemoer (ZA)
> > <Louis.Koekemoer at za.didata.com> wrote:
> > >
> > >
> > >
> > >
> > > I need help on adding a subscriber server to a cluster. I did create
> > the
> > > subscriber on the Publisher, and after some time installing
> > subscriber, at
> > > the point of joining to Publisher I get the following message "The
> > > configuration validation with ZAMDH06056 (xxx.xxx.xxx.xxx.) failed.
> > The
> > > server could not send /receive UDP packets to the Publisher on port
> > 8500. Is
> > > network connection to ZADMH06056 up? Is the MTU size correct for this
> > > network? Does the network allow packet fragments?" We can ping this
> > server
> > > from the voice VLAN, and I can ping Subscriber IP from Publisher, so
> > we
> > > don't think we have network connectivity issues here.
> > >
> > >
> > >
> > > Kind Regards
> > >
> > >
> > >
> > > Louis
> > >
> > >
> > >
> > > This email and all contents are subject to the following disclaimer:
> > >
> > > "http://www.dimensiondata.com/emaildisclaimer.htm"
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > >
> > This email and all contents are subject to the following disclaimer:
> >
> > "http://www.dimensiondata.com/emaildisclaimer.htm"
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
> > This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
> > This email and all contents are subject to the following disclaimer:
> >
> > "http://www.dimensiondata.com/emaildisclaimer.htm"
> >
> This email and all contents are subject to the following disclaimer:
>
> "http://www.dimensiondata.com/emaildisclaimer.htm"
>
More information about the cisco-voip
mailing list