[cisco-voip] back to back isdn bri/pri connectivity

[Jorge L. Rodriguez Aguila]

You can COnnect a PRI to a PRI back to back or a BRI to BRI back to back. I Don't think you could do BRI to PRI though if you were thinking about that.
Choose an ISDN format, ie DMS-100, NI, etc and set one router to user and the other to network and it should work fine for you.

Jorge Rodriguez
CCNA,CCVP,CRMCS
Senior Voice/Data Consultant
Netxar Technologies
jorge.rodriguez at netxar.com

________________________________________
From: cisco-voip-bounces at puck.nether.net [cisco-voip-bounces at puck.nether.net] On Behalf Of Syed Khalid Ali [Khalid_Khursheed at hotmail.com]
Sent: Wednesday, April 09, 2008 7:18 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] back to back isdn bri/pri connectivity

Hi

I have a couple a 2600 with BRI and PRI cards. Is there any way that I can connect them back to back in my lab.

regards,

khalid