[cisco-voip] Configuring POTS dial peer so that it returns busy if FXS is in use

[Ryan Ratliff]

Isn't there a command on the dial-peer you can use to tell it to stop  
looking for an alternate ('hunt stop' maybe)?  Been a long time since  
I messed with routers but this may get what you want.

-Ryan

On Apr 10, 2008, at 11:55 AM, Robert Kulagowski wrote:
I've got an analog fax machine connected to an EVM in a 2851; router is
running 12.4(15)T4.  If a call comes in on the PRI, the
destination-pattern is setup so that the call goes to the fax.  However,
if a second call comes in while the first is still in progress, the
router is returning unassigned rather than busy.

"max-conn 1" on the dial-peer didn't do what I want.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip