[cisco-voip] power supply for ip phone

[Dan Letkeman]

I'm looking at powering some 7941's and some 7911's.

The model number on the 1131ag power supply is:

Cisco P/N: 34-1977-04
Model: EADP-18FB B


On Thu, Apr 10, 2008 at 4:02 PM, Jorge L. Rodriguez Aguila
<jorge.rodriguez at netxar.com> wrote:
> The POE from a Wifi Antenna power injector SHOULD power an IP phone as the antennas use more power than most IP phones. What model is the IP Phone?
>
>
>  Jorge Rodríguez Aguila
>  CCNA,CCVP,CRMCS
>  Senior Voice/Data Network Consultant
>  Netxar Technologies
>  jorge.rodriguez at netxar.com
>  Office 787-765-0058
>  PCS 787-688-8530
>
>
>
>
>
>
>  -----Original Message-----
>  From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
>  Sent: Thursday, April 10, 2008 4:40 PM
>  To: cisco-voip at puck.nether.net
>  Subject: [cisco-voip] power supply for ip phone
>
>  Hello,
>
>  Does anyone know if the power supply from an 1131ag is the same power
>  supply that powers an IP phone?
>
>  Thanks,
>  Dan.
>  _______________________________________________
>  cisco-voip mailing list
>  cisco-voip at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-voip
>