[cisco-voip] CUCM Location question

[Frazee, Timothy]

Just a side question..... how much total bandwidth for that WAN remote
do you have?

Those location settings should match up to your QOS policy (unless
you're doing RSVP) not just the bandwidth of the link.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erick Bergquist
Sent: Saturday, April 12, 2008 5:55 PM
To: Cisco Voip
Subject: [cisco-voip] CUCM Location question

Does signalling traffic count toward location bandwidth?

Have a setup where a site has audio bandwidth set to 1544, and when
there are no phone calls active, it is using 39 bandwidth for
CallsInProgress object under Locations in RTMT.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.