[cisco-voip] CUCM Location question

[Erick Bergquist]

It is showing the same amount of bandwidth used after a resync of
bandwidth, with no calls. I should have mentioned that in my original
post


On Sun, Apr 13, 2008 at 7:54 AM, Matthew Saskin <matt at saskin.net> wrote:
> Location-based CAC uses a fixed amount of bandwidth based on protocol.
> 24kbps for G.729 and 80kbps for G.711 iirc.  If you're seeing bandwidth
> being used without any calls in progress, I'd suggest doing a resync for
> that location (resync button is on the location page in ccmadmin).
>
>  Erick Bergquist wrote:
>
> >
> >
> >
> > Does signalling traffic count toward location bandwidth?
> >
> > Have a setup where a site has audio bandwidth set to 1544, and when
> > there are no phone calls active, it is using 39 bandwidth for
> > CallsInProgress object under Locations in RTMT.
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
> >
>
>