[cisco-voip] CFA to predefined number

[Lelio Fulgenzi]

Try creating a blank translation to the destination - put it in a partition 
that is the only partition in a specific CSS then assign this CSS to the 
forwarding search space.

It might work.

Basically the same steps as creating a plar.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"Bad grammar makes me [sic]" - Tshirt

----- Original Message ----- 
From: "Robert Schuknecht" <rschuknecht at gmx.de>
To: "Cisco-VoIP PuckNetherNet" <cisco-voip at puck.nether.net>
Sent: Wednesday, April 16, 2008 4:46 AM
Subject: [cisco-voip] CFA to predefined number


> Hi List,
>
> is it possible to restrict CallForwardAll to an predefined number, so the 
> user has only to press the CFA Softkey and all calls are forwarded to an 
> predefined number?
>
> Any hints and ideas are welcome!
>
> /Robert
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>