[cisco-voip] Need to disable call waiting

[Muneeb khan]

Dear,

just follow the following steps,

--> go to DN and go into directory number configuration
--> then go on the Multiple Call / Call waiting setting,
--> there you put busy trigger as 1.


problem will be resolved.


regards
Muhammad Muneeb Khan


On Thu, Apr 24, 2008 at 4:37 PM, Manuel De Miguel <
manuel.demiguel at grupoica.com> wrote:

> Hi, there.
>
> I'd need to disable the call waiting functionality on CCM v6.1, that is,
> if a user is using his/her phone and receives a call, the calling party
> should receive a "busy tone", not a dialing tone. So, the called party
> shouldn't see any "incoming calling message" on the screen.
>
> Any idea?
>
> Regards.
>
> Manuel.
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080424/1ee23699/attachment-0001.html