[cisco-voip] Antw: Re: Dial-peers gone crazy...

[Robert Schuknecht]

Jonathan,

AFAIK the dial-peer Tag is not used in dial-peer matching. The dial-peer matching depends on "incoming called-number"; "answer-address", "destination-pattern" and "port".

/Robert

>>> Jonathan Charles<jonvoip at gmail.com> schrieb am Freitag, 1. August 2008 um 15:50
in Nachricht 3aafb946aae5232e997381b336692447:
> Incoming calls will match the first dial-peer listed.
> 
> Without incoming called-number . the system gives the caller dial
> tone. With it, it collects digits and passes it to the next peer.
> 
> My guess is your inbound is matching PID=0 and doing wacky stuff.
> 
> Delete dial-peer voice 1 it looks to be screwing stuff up...
> 
> 
> Jonathan
> 
> On Fri, Aug 1, 2008 at 8:41 AM, Anthony Kouloglou <akoul at dataways.gr> wrote:
>> Hi Charles,
>> why add this only in 1030?
>> What does it do?
>> Do i realy need dial-peer voice 1 pots?
>>
>> Thanks a lot
>> Anthony
>>
>> Jonathan Charles wrote:
>>
>> Add this:
>>
>> dial-peer voice 1030 pots
>>  incoming called-number .
>>
>> That is why you are getting DT.
>>
>>
>>
>> Jonathan
>>
>> On Fri, Aug 1, 2008 at 1:44 AM, Anthony Kouloglou <akoul at dataways.gr> wrote:
>>
>>
>> Hi Jonathan,
>> here are my dial-peers:
>> When user who has the cell phone number 6912345678 calls the E1 number,
>> voice translation rule -1, although it changes the called number to 4011, it
>> does not call the 4011 but instead, user of cell phones gets tone from the
>> router!!
>> All other incoming calls are routed to 4011 with no problem.
>>
>> voice translation-rule 1
>>  rule 15 /.*/ /4011/
>> !
>> voice translation-profile TP01
>>  translate called 1
>> !
>> voice-port 0/3/0:15
>>  translation-profile incoming TP01
>>  bearer-cap Speech
>> !
>> voice-port 2/0/17
>>  input gain 14
>>  connection plar 4011
>>  description ### FXO Connected to FCT 2: 6911223344 ###
>>  station-id name Call To FCT2
>>  station-id number 6911223344
>>  caller-id enable
>> !
>> dial-peer voice 1030 pots
>>  description ### All International Calls - No Prefix 0 ###
>>  destination-pattern 00T
>>  direct-inward-dial
>>  port 0/3/0:15
>>  prefix 00
>> !
>> dial-peer voice 1041 pots
>>  description ### Calls To Greece LandLine - No Prefix 0 ###
>>  destination-pattern 2.........
>>  direct-inward-dial
>>  port 0/3/0:15
>>  prefix 2
>> !
>> dial-peer voice 1042 pots
>>  description ### Calls To Greece Mobile - No Prefix 0 ###
>>  destination-pattern 6.........
>>  direct-inward-dial
>>  port 0/3/0:15
>>  prefix 6
>> !
>> dial-peer voice 1050 pots
>>  description ### Calls To Greece Special Numbers - No Prefix 0 ###
>>  destination-pattern 1T
>>  direct-inward-dial
>>  port 0/3/0:15
>>  prefix 1
>> !
>> dial-peer voice 1051 pots
>>  description ### Calls To Greece Low Toll/No Toll Numbers - No Prefix 0 ###
>>  destination-pattern 8T
>>  direct-inward-dial
>>  port 0/3/0:15
>>  prefix 8
>> !
>> dial-peer voice 1 pots
>>  destination-pattern .
>>  direct-inward-dial
>> !
>> dial-peer voice 6000 pots
>>  description ### Calls To CellPhone 1 ###
>>  destination-pattern 6912345678
>>  port 2/0/17
>>  prefix 6912345678
>> !
>>
>>
>> Thanks and Regards
>> Anthony
>>
>> Jonathan Charles wrote:
>>
>> What is the order of your dial-peers?
>>
>> First off, your first dial-peers should be pots and have the
>> incoming-called number . command on them
>>
>> Second, are you using variable length matching on your dial-peers?
>> (any route patterns with a T on them?)
>>
>> Post all of your dial-peers...
>>
>>
>>
>> Jonathan
>>
>> On Thu, Jul 31, 2008 at 12:19 PM, Anthony Kouloglou <akoul at dataways.gr>
>> wrote:
>>
>>
>> Hi,
>> i have a 2800 series router with one E1 and 2 FXOs where FCTs are connected
>> I have one dial-peer pots pointing to E1 and 5-6d dial-peer pots pointing to
>> FXOs so only specific destinations are routed via the FCTs.
>> One of these dial-peers are like this:
>>
>> dial-peer voice 6000 pots
>> destination-pattern 69123456
>> prefix 69123456
>> port 0/2/0
>>
>> and also:
>>
>> dial-peer voice 2 pots
>> destination-pattern 6.......
>> prefix 6
>> port 0/3/0:15
>>
>> All seem to work well until cell phone with number 69123456 did not call the
>> FCT number but the E1 number.
>> Then, as the voip ccapi debug showed, the incoming number matched dial-peer
>> 6000 and so the caller got dial-tone of the router instead of being routed
>> to the console number (there is translation profile applied at the voice
>> port which works fine for all other calling numbers that do not match any
>> dial-peer)
>>
>> Could someone help one this?
>>
>> Thanks
>> akoul
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-voip 
>>
>>
>>
>>
>>
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net 
> https://puck.nether.net/mailman/listinfo/cisco-voip