[cisco-voip] DID routing question

[Scott Voll]

you didn't mention if the VGW was H323 or MGCP.

you can do digit manipulation with H323.

MGCP I'm not sure.  you might be able to use a VGW CSS to a Translation
pattern to add it.

Scott

On Fri, Aug 1, 2008 at 12:17 PM, Kienzle, John <John.Kienzle at anadarko.com>wrote:

>  We currently have a block of 200 DID's (685 5700 to 5899). When the call
> comes in on the PRI, a "1" is added for our 5 digit extensions. We recently
> acquired another block of 500 DID's (670 6000 to 6499). We are bringing them
> in on the same PRI as the 200 number block, but want to add a "4" for the 5
> digit extension. Is this possible to do both at the same time?
>
> Thanks in advance
>
> John Kienzle
>
>  ------------------------------
>
> *Anadarko Confidentiality Notice: This electronic transmission and any
> attached documents or other writings are intended only for the person or
> entity to which it is addressed and may contain information that is
> privileged, confidential or otherwise protected from disclosure. If you have
> received this communication in error, please immediately notify sender by
> return e-mail and destroy the communication. Any disclosure, copying,
> distribution or the taking of any action concerning the contents of this
> communication or any attachments by anyone other than the named recipient is
> strictly prohibited. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080801/59428613/attachment.html>