[cisco-voip] Alerting Name being passed to PBX

[William Roy]

I have NEC IPX2400 PBX connected to a ISR2851 via an QSIG E1 link. The ISR is setup as an MGCP gateway with a CUCM 6.1 cluster. I am not seeing Calling name being passed either from an NEC phone to a Cisco IP phone or visa versa. Is there any debug I can run on the ISR to see if the cisco ip phone is sending Calling name?

regards
Wil
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080806/cf6666af/attachment.html>