[cisco-voip] vg224 analog phone function/feature codes

[Lelio Fulgenzi]

I have to do something similar. So I haven't tested it yet.

You have to enable it and the define them.

http://www.cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxsfeatmd.html

Here's a starting point.

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...seen on a Geek Squad patch cord: "While it is the same length, this 7' 
crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
----- Original Message ----- 
From: "Joe Cisco" <smetsysocsic at gmail.com>
To: <cisco-voip at puck.nether.net>
Sent: Friday, August 08, 2008 3:51 PM
Subject: [cisco-voip] vg224 analog phone function/feature codes


> I've been told that an analog phone on a vg224 can use special feature
> codes to transfer, conference, hold calls, etc. (example: *31 puts a
> call on hold) I can't find any documentation. Any help is appreciated.
>
> Thanks,
>
> Joe C.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>