[cisco-voip] Paging system

[Jason Aarons (US)]

Buy a shiny Chatworth aluminum shelf and bolt or weld Valcom/Bogen to
the shelf <grin>....with a good metal shop you can make some neat
stuff...sort of like Orange County Choppers for VoIP...

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Steve G
Sent: Tuesday, August 12, 2008 12:57 PM
To: Jonathan Charles
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Paging system

 

Sorry, I dont think that is rack mounted as you would like.  usually
wall mounted.

On 8/12/08, Steve G <smgustafson at gmail.com> wrote: 

Valcom 2006a supports 6 zones and connects to FXO.  works well.

On 8/12/08, Jonathan Charles <jonvoip at gmail.com> wrote: 

	Need a 5-zone paging system, rack mounted, with an amp and needs
to connect to an FXO on a 2811. It needs to be one unit, no adapters.
	
	Any suggestions?
	
	
	
	Jonathan
	 

	 

	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

 

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080812/4c5cd3e5/attachment.html>