[cisco-voip] PVDM2 and PVDM question.

[Paul]

Wow Jon, Where'd ya find that gem? That doesn't sound like an obvious detail you'd find just by looking at the CCM GUI.

Paul



----- Original Message ----
From: Jonathan Charles <jonvoip at gmail.com>
To: David Lima <David.Lima at alphasys.com.bo>
Cc: "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
Sent: Thursday, August 14, 2008 12:47:26 PM
Subject: Re: [cisco-voip] PVDM2 and PVDM question.


Big enough that they are entered into CCM differently (Cisco IOS Conference Bridge or Cisco IOS Enhanced Conference Bridge, with the latter being for a PVDM2).



Jonathan


On Thu, Aug 14, 2008 at 10:26 AM, David Lima <David.Lima at alphasys.com.bo> wrote:

Hi friends, I have a question about resources. I had
a CCM 3.3(4)sr2 with a Cisco 2620XM with PVDM functioning as conferencing and
transcoding resources. It was working fine and when I migrate the version to a
CCM 4.1(3)sr7 I couldn't establish a conference between ip phones and cell-phones.
But when I change the PVDM for PVDM2 (Cisco 2801), the conference works again.
Somebody had a similar problem? Is there a big
difference between PVDM and PVDM2? The upgrade can be causing this?
Thanks a lot dear friends
David.
. 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080814/de096502/attachment.html>