[cisco-voip] Trying to do a 0-out on UCCX...

[Philip Walenta]

If memory serves me, setting all the steps in the "hold" cycle as
interruptible makes this happen.  If they push "0" at any time I believe
that it will jump through a bunch of steps to the next get digits (assuming
you've not flushed the input buffer).

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan Charles
Sent: Tuesday, August 19, 2008 3:37 AM
To: Turpin, Mark
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Trying to do a 0-out on UCCX...


That did it... 

Thanks...

Now... how do I make the 0 out available during the entire queue time...?



Jonathan


On Mon, Aug 18, 2008 at 6:37 PM, Turpin, Mark <mark.turpin at calence.com>
wrote:


Change retries to 0 perhaps?

--

Mark Turpin
CCIE #21649
Cell 314.660.5800

Mobile Message 


On Aug 18, 2008, at 5:29 PM, "Jonathan Charles" <jonvoip at gmail.com> wrote:



So, I have a get digit string while queued, however, when it plays the
prompt (on the digit string), if you enter nothing, it says, 'are you still
there' and plays the prompt again....

How do I have it ignore no input?



Jonathan

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080819/5c45c527/attachment.html>