[cisco-voip] disabling unityinstall after install where is this documented on cisco.com

[Jonathan Charles]

Provided no Unity services are using the account, then you should be able to
just disable it in AD.



Jonathan

On Sun, Aug 24, 2008 at 10:06 PM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  I always encourage disabling unityinstall account after install, but
> trying to find a cisco.com url where that is documented….
>
>
>
> Usually that account has elevated rights and shouldn't be used day to day
> for administration versus unityadmin….
>
>
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080825/a742d9af/attachment.html>