[cisco-voip] Call manager configuration

[Ryan West]

Salo,

I don't think there is native support in 4.1 for SIP to a trunk, so you'll need to configure your H323 gateway to take care of this.

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kelemen Zoltan
Sent: Wednesday, August 27, 2008 9:35 AM
To: Salo Ben-Avi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Call manager configuration

Hi!

  You need to set up a SIP trunk(s) to the SIP server(s). Here are some examples, these are detailed for Asterisk, but you'll get the point:
http://www.voip-info.org/wiki/view/Asterisk+Cisco+CallManager+Integration

regards,
  Zoltan

Salo Ben-Avi wrote:
Hi Guys,
I have probably a stupid question but I'm not used to work with CCM.
Normally I worked with UCME and there is very simple to route calls to a sip server or other PBX I'm trying to configure the Call manager to send the outgoing calls to a sip server but in the list are only cisco devices and I don't want to work with one of them I want to send the call if is not an extension of the CM itself outside to this sip server can someone send me a guide or instructions how to do so. CM version 4.1(2)
Thanks in advance
Salo Ben-avi








________________________________






_______________________________________________

cisco-voip mailing list

cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>

https://puck.nether.net/mailman/listinfo/cisco-voip



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080827/2923840b/attachment.html>