[cisco-voip] Faxxing Issues with VG224

Jason Aarons (US) jason.aarons at us.didata.com
Tue Jul 1 12:14:16 EDT 2008


Check Voice gateway for clocking or slips, errors.

 

Both VG224 and Gateway I add Globally to 12.4T;

voice service voip 

 fax protocol pass-through g711ulaw

 modem passthrough nse codec g711ulaw

 

I've had good luck with router 12.4.15T5 and VG224
vg224-i6s-mz.124-6.T8.bin.  I've run into lots of bugs with VG224/SCCP
IOS in general, have had to make a lot of IOS changes to get to
vg224-i6s-mz.124-6.T8.bin.

  

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Fielder
Sent: Tuesday, July 01, 2008 11:22 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Faxxing Issues with VG224

 

I am having some issues with faxing on a VG224 configured as SCCP. Does
anyone have any information on configuring faxing on a VG224 with SCCP?




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080701/76f991d6/attachment.html>


More information about the cisco-voip mailing list