[cisco-voip] Cannot call to PSTN from AS5850

Ryan West rwest at zyedge.com
Tue Jul 29 11:21:34 EDT 2008


Mohit,

Are you sure you cannot call from a station phone?  Sometimes csim seems to ignore any translation-profile’s that might be applied, assuming this H323.  If this is MGCP, you might need to set your called party unknown to unknown, not sure how your telco is handling the presentation of 18153323338.  Maybe I’m misunderstanding what you’re asking as well.  If this an MGCP gateway, csim start will fail because there may be no dial-peers to associate to locally.

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mohit Saxena
Sent: Tuesday, July 29, 2008 10:25 AM
To: cisco voip
Subject: [cisco-voip] Cannot call to PSTN from AS5850

Hello Friends,

I am facing some problems calling to the PSTN from my AS5850.

When I do a csim start <number>
It just fails within 1 second

The debud q931 is as under:

Jul 29 13:52:33.085: ISDN Se12/6:15 SC Q931: RX <- RELEASE pd = 8  callref = 0x6A39
Jul 29 13:52:33.093: ISDN Se12/6:15 SC Q931: TX -> RELEASE_COMP pd = 8  callref = 0xEA39
Jul 29 13:52:33.197: ISDN Se12/6:15 SC Q931: RX <- SETUP pd = 8  callref = 0x6A49
        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xE98F839D
                Exclusive, Interface 15, Channel 29
        Facility i = 0x9E8100036774640000002E49414D2C0D0A4743492C38333065363538383565336531316464393763303030313434663633343935320D0A0D0A
        Calling Party Number i = 0x2183, '018179615'
                Plan:ISDN, Type:National
        Called Party Number i = 0x91, '18153323338'
                Plan:ISDN, Type:International
Jul 29 13:52:33.205: ISDN Se12/6:15 SC Q931: TX -> CALL_PROC pd = 8  callref = 0xEA49
        Channel ID i = 0xE98F839D
                Exclusive, Interface 15, Channel 29
Jul 29 13:52:33.285: ISDN Se12/6:15 SC Q931: Applying typeplan for sw-type 0x19 is 0x0 0x0, Called num 23498706315
Jul 29 13:52:33.285: ISDN Se12/6:15 SC Q931: TX -> SETUP pd = 8  callref = 0x6E12
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xE180838C
                Preferred, Interface 0, Channel 12
        Facility i = 0x9E0100036774640000002E49414D2C0D0A4743492C36643839313839613563616331316464386336373938626263633630316264370D0A0D0A
        Called Party Number i = 0x80, '23498706315'
                Plan:Unknown, Type:Unknown
Jul 29 13:52:33.305: ISDN Se12/6:15 SC Q931: RX <- CALL_PROC pd = 8  callref = 0xEE12
        Channel ID i = 0xE980838C
                Exclusive, Interface 0, Channel 12
Jul 29 13:52:33.397: ISDN Se12/6:15 SC Q931: TX -> DISCONNECT pd = 8  callref = 0xEA3A
        Cause i = 0x8092 - No user responding
Jul 29 13:52:33.473: ISDN Se12/6:15 SC Q931: RX <- DISCONNECT pd = 8  callref = 0xEE12
        Cause i = 0x829F - Normal, unspecified
Jul 29 13:52:33.481: ISDN Se12/6:15 SC Q931: TX -> RELEASE pd = 8  callref = 0x6E12
Jul 29 13:52:33.485: ISDN Se12/6:15 SC Q931: RX <- RELEASE pd = 8  callref = 0x6A3A
Jul 29 13:52:33.497: ISDN Se12/6:15 SC Q931: TX -> RELEASE_COMP pd = 8  callref = 0xEA3A
Jul 29 13:52:33.501: ISDN Se12/6:15 SC Q931: RX <- RELEASE_COMP pd = 8  callref = 0xEE12
Jul 29 13:52:33.753: ISDN Se12/6:15 SC Q931: RX <- SETUP pd = 8  callref = 0x6A4A


Can anyone help.

Brgds,

Mohit C. Saxena
Sr. Network Administrator
Starcomms Ltd.
www.starcomms.com<blocked::http://www.starcomms.com>
Mob: +234-702-800-0709
________________________________
DISCLAIMER:The information contained in this message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and permanently delete this message and any attachments from your system. Any form of dissemination, use, review, distribution, printing or copying of this message in whole or in part is strictly prohibited if you are not the intended recipient of this e-mail. Please note that e-mails are susceptible to change. STARCOMMS PLC shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. STARCOMMS PLC does not guarantee that the integrity of this communication has been maintained or that this communication is free of viruses, interceptions or interferences. STARCOMMS PLC reserves the right to monitor all e-mail communications, whether related to the business of STARCOMMS or not, through its internal or external networks. DISCLAIMER:The information contained in this message (including any attachments) is confidential and may be privileged. If you have received it by mistake please notify the sender by return e-mail and permanently delete this message and any attachments from your system. Any form of dissemination, use, review, distribution, printing or copying of this message in whole or in part is strictly prohibited if you are not the intended recipient of this e-mail. Please note that e-mails are susceptible to change. STARCOMMS PLC shall not be liable for the improper or incomplete transmission of the information contained in this communication nor for any delay in its receipt or damage to your system. STARCOMMS PLC does not guarantee that the integrity of this communication has been maintained or that this communication is free of viruses, interceptions or interferences. STARCOMMS PLC reserves the right to monitor all e-mail communications, whether related to the business of STARCOMMS or not, through its internal or external networks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080729/6939a05a/attachment-0001.html>


More information about the cisco-voip mailing list