[cisco-voip] Setting up a SIP trunk...anything special?

[Jonathan Charles]

Make sure you check MTP Required to make sure you pass RFC2833 DTMF



Jonathan

On Thu, Jul 31, 2008 at 1:36 PM, Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
> I am setting up a SIP trunk to a Cistera appliance (I believe they are using
> asterisk) in order for the box to dial out. The SIP trunk setup went fine
> and without incident. Is there anything else I need to do? Someone mentioned
> to me a while back that I would need something else like a transcoder.
>
> Any pointers would be great.
>
> Thanks,
>
> Lelio
> --------------------------------------------------------------------------------
> Lelio Fulgenzi, B.A.
> Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
> (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> ...seen on a Geek Squad patch cord: "While it is the same length, this 7'
> crossover cable
> is not regulation issue for most competitive Manhattan double dutch leagues.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>