[cisco-voip] CISCO 2851
David Toledo
DavidT at MorganMint.com
Tue Jun 3 16:08:01 EDT 2008
I got it to work with the command bellow
But now when type the command: show snmp
It show that the: "SNMP logging: disabled"
Why is that
Thanks
David
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mordechai
Sent: Tuesday, June 03, 2008 3:48 PM
To: David Toledo; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
Where is the ^ marker stuck? If under ro than try upper case RO.
Otherwise the syntax is correct:
snmp-server community kh0vr0 RO 50
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Toledo
Sent: Tuesday, June 03, 2008 3:36 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
Sorry guys I'm not familiar with the command very well
I enable but not sure if woulf runn this command bellow
snmp-server community kh0vr0 ro 50 ???
! Create SNMP communities and username
!access-list 50 permit host xxxxxxxxxx
!snmp-server community kh0vrw RW 50
!snmp-server community kh0vr0 RO 50
!snmp-server system-shutdown
!username %%%% password xxxxxxx
Thanks
David
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Griffin
Sent: Tuesday, June 03, 2008 3:25 PM
To: David Toledo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
have you enabled "enable" and entered config mode " conf t"
On Tue, Jun 3, 2008 at 2:22 PM, David Toledo <DavidT at morganmint.com>
wrote:
I try to enable my snmp on cisco 2851 I got this error
% Invalid input detected at '^' marker.
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Nick Griffin
Sent: Tuesday, June 03, 2008 3:09 PM
To: David Toledo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CISCO 2851
snmp-server community BLAH
On Tue, Jun 3, 2008 at 2:06 PM, David Toledo <DavidT at morganmint.com>
wrote:
Does any one know how to enable snmp for the cisco 2851 router
Thanks
David
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
No virus found in this incoming message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6/1480 - Release Date:
6/3/2008 7:00 AM
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.524 / Virus Database: 269.24.6/1480 - Release Date:
6/3/2008 7:00 AM
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080603/39c3e0fb/attachment.html>
More information about the cisco-voip
mailing list