[cisco-voip] Keeping phones in SRST Mode
Ryan Ratliff
rratliff at cisco.com
Wed Jun 4 11:29:36 EDT 2008
Add an ACL on the appropriate router to block TCP 2000 to the CCMs.
-Ryan
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Christopher M.
Bomba
Sent: Wednesday, June 04, 2008 11:22 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Keeping phones in SRST Mode
We have a H.323 gateway with SRST configured on it. The link between the
site and CCM is flapping causing the phones to bounce between SRST and CCM.
How would I make the phones stay in SRST mode until I know the link is
stable?
If the device was configured as MGCP we see a command "ccm-manager
switchback never or uptime-dely" could work but we are not in MGCP.
Thanks,
Chris
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Christopher Bomba CCNP, CCVP
solutions4networks
Email - chris at s4nets.com
Cell - 412.398.3990
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list