[cisco-voip] Keeping phones in SRST Mode
Christopher M. Bomba
cbomba at s4nets.com
Wed Jun 4 12:23:24 EDT 2008
Thanks, I was hoping to find a command similar to the "ccm-manager switchback" command.
The ACL solution is a manual process and if I could create something that would monitor the link and if it stayed up for > 30 minutes then allow the phones to switchback. What about a script of some sorts to put on the router?
I guess since H.323 is Peer-to-Peer I don't have the ability to rely on something else monitoring the link.
Chris
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Christopher Bomba CCNP, CCVP
solutions4networks
Email - chris at s4nets.com
Cell - 412.398.3990
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----Original Message-----
From: Lelio Fulgenzi <lelio at uoguelph.ca>
Sent: Wednesday, June 4, 2008 11:32am
To: cbomba at s4nets.com, cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Keeping phones in SRST Mode
We want to prepare for something like this as well. The easiest thing to do
would be to create an ACL at the main site (which would have the more
stable) and simply prevent access to all your voip servers. You could
simplify this with an alias that would copy a bunch of commands stored in a
file to the running config. If you have numbered ACLs, it's even easier.
Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...seen on a Geek Squad patch cord: "While it is the same length, this 7'
crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
----- Original Message -----
From: "Christopher M. Bomba" <cbomba at s4nets.com>
To: <cisco-voip at puck.nether.net>
Sent: Wednesday, June 04, 2008 11:21 AM
Subject: [cisco-voip] Keeping phones in SRST Mode
> We have a H.323 gateway with SRST configured on it. The link between the
> site and CCM is flapping causing the phones to bounce between SRST and
> CCM. How would I make the phones stay in SRST mode until I know the link
> is stable?
>
> If the device was configured as MGCP we see a command "ccm-manager
> switchback never or uptime-dely" could work but we are not in MGCP.
>
> Thanks,
> Chris
>
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> Christopher Bomba CCNP, CCVP
> solutions4networks
> Email - chris at s4nets.com
> Cell - 412.398.3990
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list