[cisco-voip] Voip - Default Route to Voice Calls That are not Registered on GK

[Christianno Marcenes]

Hi everybody,

     Is there any way to route voice calls that is not registered on GK to a
default PBX of GK Site?

Example: We have a network with 100 sites MPLS registered on GK and 50 sites
in an Old FR Network. It is like a default route with the voice calls.

1) GK Configuration:
gatekeeper
 zone local gk-mluiza mluiza.com 192.168.1.25
 no shutdown

dial-peer voice 1 pots
 destination-pattern 500....
 port 0/3/1:1
 forward-digits all
!
dial-peer voice 200 voip
 destination-pattern .......
 session target ras

2) GW Configuration Central Site:
interface GigabitEthernet0/1
 bandwidth 34816
 h323-gateway voip interface
 h323-gateway voip id gk-mluiza ipaddr 192.168.1.25 1719
 h323-gateway voip h323-id MG_LUIZA-CENTRAL
 h323-gateway voip tech-prefix 500
 h323-gateway voip bind srcaddr 192.168.1.23

3) GW Configuration Remote Site:
interface FastEthernet0/0
 h323-gateway voip interface
 h323-gateway voip id gk-mluiza ipaddr 192.168.1.25 1719
 h323-gateway voip h323-id MG_LUIZA-LOJA-331
 h323-gateway voip tech-prefix 331
 h323-gateway voip bind srcaddr 10.101.77.1

dial-peer voice 100 pots
 destination-pattern 3312200
 port 2/0
!
dial-peer voice 200 pots
 destination-pattern 3312200
 port 2/1
!
dial-peer voice 300 voip
 destination-pattern .......
 session target ras

4) Example of Sites registered:
SPO_0428292_MLUIZA_PRINCIPAL#sh gatekeeper endpoints
                    GATEKEEPER ENDPOINT REGISTRATION
                    ================================
CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags
--------------- ----- --------------- ----- ---------         ----    -----
10.101.77.1     1720  10.101.77.1     54781 gk-mluiza         VOIP-GW
    E164-ID: 3312200
    H323-ID: MG_LUIZA-LOJA-331
    Voice Capacity Max.=  Avail.=  Current.= 0
10.101.172.1    1720  10.101.172.1    55090 gk-mluiza         VOIP-GW
    E164-ID: 4262200
    H323-ID: MG_LUIZA-LOJA-426
    Voice Capacity Max.=  Avail.=  Current.= 0


Best Regards,

-- 
Christianno Marcenes
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080604/4e6232a4/attachment.html>