[cisco-voip] FXS and DSP

[David Lima]

Thanks a lot for the link man, but according with the DSP Calculator, this relationship is correct?

                               1 PVDM2-8 (1 DSP) has 8 voice channel to g711.
                               1 FXS/FXO port needs two voice channel (1 for TX and the other 1 for RX)
                               then
                               1 PVDM2-8 can support 1 VIC2-4FXS

Thanks for your answer
David
________________________________________
De: Joe Cisco [smetsysocsic at gmail.com]
Enviado el: miércoles, 04 de junio de 2008 04:54 p.m.
Para: David Lima
CC: cisco-voip at puck.nether.net
Asunto: Re: [cisco-voip] FXS and DSP

Cisco DSP Calculator:

http://www.cisco.com/cgi-bin/Support/DSP/cisco_prodsel.pl

-Joe C.

On Wed, Jun 4, 2008 at 3:42 PM, David Lima <David.Lima at alphasys.com.bo<mailto:David.Lima at alphasys.com.bo>> wrote:
Hi guys, I need to install two VIC2-4FXS ports in a router Cisco  2801, could any one told me how to calculate the necessary DSP?

David

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip