[cisco-voip] how can I block phone numbers

[David Toledo]

Hello Sir,
 
I'm sorry for my poor understanding.
I'm new to Cisco IPhone System my boss wants to BLOCK inbound calls ( incoming call few people calling to bother our staff )
we know they numbers and we just need to block 3 phone numbers and I do not know where and how to do that.
we using "Cisco Unified CallManager 5"  if you kind tell me the steps to fallow so I block this people incoming phone numbers.
if you need more information I glad to provide to you.
 
I really appreciated if you can guide me to accomplished this task.
 
Thanks,
 
 
David
 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Joe Cisco
Sent: Wed 6/4/2008 7:10 PM
To: Countryman, Edward
Cc: David Toledo; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] how can I block phone numbers


I guess we're still not clear. I took inbound to mean blocking calls based on their inbound caller id.

-Joe C.


On Wed, Jun 4, 2008 at 5:08 PM, Countryman, Edward <Edward.Countryman at provena.org> wrote:


	Place the DN into a partition that the CSS on the gateway doesn't see.  

	 

	
________________________________


	From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Toledo
	Sent: Wednesday, June 04, 2008 4:50 PM
	To: cisco-voip at puck.nether.net 

	Subject: Re: [cisco-voip] how can I block phone numbers

	

	 

	Sorry,

	 

	I meant inbound calls Apologized for the miss understanding 

	 

	 

	Thanks again

	 

	 

	David

	 

	
________________________________


	From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Cisco
	Sent: Wednesday, June 04, 2008 5:41 PM
	To: David Toledo
	Cc: cisco-voip at puck.nether.net
	Subject: Re: [cisco-voip] how can I block phone numbers

	 

	If you are talking outbound, there are several ways to do it. You can create a specific route pattern with the exact number you wish to block and under the ROUTE OPTION field, mark the radio button next to "block this pattern" and select CALL REJECTED in the dropdown box. Put that route pattern in the same partition as the partition used to control calls to whatever type of call you are blocking- LD, Local, etc. If there are multiple numbers, you can create a route filter with multiple clauses listing the different numbers you wish to block. We do this and use a route filter to block 900 numbers, off shore numbers, telescam numbers, etc.
	
	-Joe C.

	On Wed, Jun 4, 2008 at 4:28 PM, David Toledo <DavidT at morganmint.com> wrote:

	I need help in blocking some phone numbers in my Cisco Unified CallManager

	 

	How can I do that ??

	 

	 

	Thanks

	 

	 

	David

	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

	 


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080605/5d527f76/attachment-0001.html>