[cisco-voip] Nokia e61i SIP configuration
Michael Muscat
michaelm at umcu.org
Fri Jun 6 09:17:13 EDT 2008
Speaking of Nokia E61i phone's, does anyone know what U.S carriers these work for? I was told AT&T, but when I spoke to a rep, they said that these phones will not work with any U.S. carriers. I would like to add a few to my call manager, but don't want to unless they work with a U.S. carrier. Please let me know who you are using.
-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Omori, Hiroshi
Sent: Thursday, June 05, 2008 8:11 PM
To: peter ejmont
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Nokia e61i SIP configuration
Thanks, Peter,
That worked!
Hiroshi
-----Original Message-----
From: peter ejmont [mailto:pejmont at gmail.com]
Sent: Thursday, June 05, 2008 12:07 PM
To: Omori, Hiroshi
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Nokia e61i SIP configuration
few steps needed. for simplicity, I chose the same
userid/password/telephone number
create an end user in ccm (example follows)
user id --> 15025
pass --> 15025
last name --> 15025
telephone number --> 15025
digest credentials --> 15025
presence group --> standard presence group
leave mobility or mobile voice access boxes unchecked
add a nokia phone:
-add a third party sip device (basic)
-enter the mac address of the phone (enter *#62209526# on your phone
to get it)
-choose third-party sip device (basic) phone button template
-standard common phone profile
-owner user id -> 15025
-in protocol specific information:
--device security profile -> choose sip non-secure
--sip profile --> standard sip profile
--digest user --> 15025
don't forget to make that device active.
now, on the phone itself:
menu->tools->settings->connection->sip settings
profile name -> any name you want
service profile -> IETF
public username -> sip:15025 at xxx.xxx.xxx.xxx (basically ip address of
your call manager)
use compression -> no
use security -> no
registrar server address -> sip:xxx.xxx.xxx.xxx (ccm's ip address)
realm -> ccmsipline (default on call manager)
user name -> 15025
password -> 15025
transport -> udp (or auto)
port -> 5060
if you use proxy:
same info as above.
this config will work for every nokia wifi enabled device.
hope this helps,
thanks,
peter
Omori, Hiroshi wrote:
>
>
> I was wondering if anyone on this listserve has configured a Nokia e61i
> SIP phone on a CUCM 6.1 cluster. I can get the e61i to work as a SCCP
> phone but I'm not having much luck getting it to work as SIP device.
>
>
>
> Any links or info would be appreciated. I haven't had any luck using the
> 3^rd party SIP device type.
>
>
>
> I also loaded the cmterm-nokia_s60_2.0-sccp.cop.sgn file but it appears
> that file only makes the SCCP s60 device type appear.
>
>
>
> Thanks!
>
>
>
> Hiroshi Omori
>
> Network Engineer
>
> UCLA - University of California , Los Angeles
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list