[cisco-voip] old Unified PhoneProxy 1.0

[Scott Voll]

I will be in August.  I'm assuming the newest firmware must support CM 6.1
as it doesn't support CM 4.1 as I tried it and it didn't work.  had to back
down.

Scott

On Thu, Jun 12, 2008 at 10:40 AM, Jason Aarons (US) <
jason.aarons at us.didata.com> wrote:

>  Any tried to deploy the Cisco (Meteros) Phone Proxy 1.0 with CallManager
> 6.X Business Edition? Will it work?
>
>
>
> PPA500-K9-PP1.0-25
>
>
>
>
> http://www.cisco.com/en/US/prod/collateral/voicesw/ps6789/ps7046/ps7057/product_data_sheet0900aecd80546906.html
>
>
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080612/54ec6088/attachment.html>