[cisco-voip] CCM6 server serial numbers ?

[kevin gannon]

Thanks everyone knew I was not going mad I had seen it on a 5.x box.
This is a 6.x box so I will have drive out. Wes thanks for the DDTS

Thanks & Regards
Kevin

On Thu, Jun 12, 2008 at 7:22 PM, Wes Sisk <wsisk at cisco.com> wrote:
> CSCso99275
>
> otherwise, use the ILO board.
>
> /wes
>
>
> schillingn wrote:
>>
>> In CM 5, the serial number shows in the CLI command show hardware.
>> In CM 6+, the serial number is no longer available remotely.
>>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of kevin gannon
>> Sent: Thursday, June 12, 2008 3:11 AM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] CCM6 server serial numbers ?
>>
>> Is there some way via ssh/web interface to get the serial number for a
>> remote server ?
>>
>> It is to allow me open a TAC case and dont want to have to drive a few
>> hundred miles
>> to get it in person.
>>
>> Thanks & Regards
>> Kevin
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>