[cisco-voip] DTMF's diferences bettwen Cube\SBC and MG AS5350

[Ellington, Chris]

Are you using a SIP provider rather than the PRI?  If so, the provider
is likely using RFC2833 media for DTMF and not inband DTMF and that is
your trouble.  You will want to configure dtmf-relay rtp-nte (which is
how Cisco does RFC2833).  I doubt it's an issue of hardware, but
certainly post a show ver for each platform because there are a some of
bugs depending on the IOS for DTMF relay.

 

chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Salo Ben-Avi
Sent: Wednesday, June 18, 2008 3:46 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] DTMF's diferences bettwen Cube\SBC and MG AS5350

 

Ihad been using a MG AS 5350 to send DTMf's to my media server in order
to collect them and it  this mg is connected to a PRI and it works ok

Now I'm trying to use a sip trunk with the cube /sbc  in order to send
the DTMF's to my media server and I'm receiving only a part of them not
consistent 

Has any one an idea which debug I can open in both (AS5350 and CUBE)
that will show me what are the Dial peers been used and the differences
between the messages sent?

Thanks in Advance  

 

 

Salo Ben-Avi

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080618/d92575ac/attachment-0001.html>