[cisco-voip] OT: mac book terminal program
Nick Griffin
nick.jon.griffin at gmail.com
Wed Jun 18 16:16:49 EDT 2008
After you get the driver nailed down there is also a port of the nix term
program, minicom:
http://minicom.darwinports.com/
I use this daily and it works real well.
On Wed, Jun 18, 2008 at 2:59 PM, Vance Shipley <vances at motivity.ca> wrote:
> On Wed, Jun 18, 2008 at 03:20:42PM -0400, Ed Leatherman wrote:
> } I have a USB - serial cable, just looking for recommendation
> } on software (i can't find any software included in the OS
> } that does this). found a few in the wild but figured i'd ask around.
>
> First you need a driver for the serial cable. Odds are it's got
> a Prolific PL-2302 chip in it in which case use the driver here:
>
> http://www.prolific.com.tw/eng/downloads.asp?ID=31
>
> This will create devices when you plug the cable in named:
>
> /dev/tty.usbserial
> /dev/cu.usbserial
>
> You may use screen(1) to attach:
>
> $ screen /dev/tty.usbserial
>
> Use ^A^\ to exit (control A, control backslash).
>
> -Vance
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080618/5eb96207/attachment.html>
More information about the cisco-voip
mailing list