[cisco-voip] CCM 6.x CLI for Platform Version and OS Version?

[Aman Chugh]

I believe sh tech system, sh hardware, sh version , I have nt tested them
but they should get you what you want.

http://www.cisco.com/en/US/docs/voice_ip_comm/cups/6_0_1/op_system/administration/guide/iptpappa.html

Aman


On 6/19/08, Jason Aarons (US) <jason.aarons at us.didata.com> wrote:
>
>  Is there CallManager 6.x CLI command to see what version Platform/OS
> Version ? Or alternately via CCMAdmin GUI.
>
>
>
> Platform Version              3.0.0.0-7               3.0.0.0-7
>
> OS Version          UCOS3.0.0.0-42 UCOS3.0.0.0-42
>
>
>
>
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080619/7ac5037f/attachment.html>