[cisco-voip] CCME 4.2 adding FXO ports to exiting PRI trunk
Jason Aarons (US)
jason.aarons at us.didata.com
Sat Jun 21 11:46:57 EDT 2008
This CCME running-config is all H323 (I don't think you can do MGCP with Unified Communication Express 4.x)
Same here all my trunk-groups have been PRIs, never a analog mix with digital. Any tried this?
From: Jorge L. Rodriguez Aguila [mailto:jorge.rodriguez at netxar.com]
Sent: Friday, June 20, 2008 3:27 PM
To: Jason Aarons (US); cisco-voip
Subject: RE: CCME 4.2 adding FXO ports to exiting PRI trunk
Are you running H.323? If you are you can create a trunk group for all FXO ports and then have two Dial-Peers with preference to go from the PRI to the Analogs. I have never done a trunk group that includes analog and digital but assume it can also be done.
Jorge Rodríguez Aguila
CCNA,CCVP,CRMCS,CIPCES
Senior Voice/Data Network Consultant
Netxar Technologies
jorge.rodriguez at netxar.com
Office 787-765-0058
PCS 787-688-8530
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (US)
Sent: Friday, June 20, 2008 3:18 PM
To: cisco-voip
Subject: [cisco-voip] CCME 4.2 adding FXO ports to exiting PRI trunk
Currenlty have CCME 4.2 with a PRI, want to add 8 FXO ports for more capacity to existing PRI. Use the PRI first, then the FXO ports if needed.
Should I made trunk-group or use dial-peers, and can I do it via http://ipaddres/ccme.html ? I didn't see a way to do it via Web GUI.
I have used CCME since it was IOS Telephony Services 2.1....
Jason Aarons
Consultant
Dimension Data
E-mail ::jason.aarons at us.didata.com
Mobile :: +1-904-338-3245 e-fax :: +1-904-339-9696
http://www.dimensiondata.com <http://www.us.didata.com>
Plan.Build.Support & Manage
For urgent issues notify your Project Manager, for 24x7 support contact the Dimension Data NOC at +1-800-974-6584 or Cisco TAC at +1-800-553-2447.
Five Phases of the Primer Lifecycle;
Inception > Definition > Build > Deployment > Transition
________________________________
Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you.
-----------------------------------------
Disclaimer:
This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only. If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful. If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080621/0bb0bc80/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 6292 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080621/0bb0bc80/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 4171 bytes
Desc: image002.gif
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080621/0bb0bc80/attachment-0001.gif>
More information about the cisco-voip
mailing list