[cisco-voip] BAT -- CM 4.1.3sr6a

[James Buchanan]

Hello,

 

For some SRs you must upgrade BAT, and it does not require a reboot.
However, you will have to reopen each existing Template, update it, and
resave it.


Thanks,

 

James

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, June 25, 2008 11:47 AM
To: Chris Clouse
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] BAT -- CM 4.1.3sr6a

 

anyone know if it requires a reboot?



 

On Wed, Jun 25, 2008 at 9:40 AM, Chris Clouse <Chris.Clouse at cdw.com>
wrote:

Not really sure, but go to the plugins page and reinstall.  It should
tell you that a previous version is installed and to update to x
release.

 

-Chris

 

From: Scott Voll [mailto:svoll.voip at gmail.com] 
Sent: Wednesday, June 25, 2008 11:39 AM
To: Chris Clouse; cisco-voip at puck-nether.net 


Subject: Re: [cisco-voip] BAT -- CM 4.1.3sr6a

 

No.  I have to reinstall BAT after each SR?

 

is that documented anywhere?

 

Scott

On Wed, Jun 25, 2008 at 9:02 AM, Chris Clouse <Chris.Clouse at cdw.com>
wrote:

Did you update BAT when you installed the latest SR?

 

-Chris

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, June 25, 2008 10:58 AM
To: Scott Coner (US)
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] BAT -- CM 4.1.3sr6a

 

I'm just adding a templete.  not the phones yet.

 

Scott

On Wed, Jun 25, 2008 at 8:06 AM, Scott Coner (US)
<scott.coner at us.didata.com> wrote:

I've seen this before in CM 4.1(3) and it turned out to be a problem
with the csv file (formatting didn't match the template).

 

Scott

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, June 25, 2008 10:48 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] BAT -- CM 4.1.3sr6a

 

I'm using BAT on CM 4.1.3sr6a and trying to add a new template (I've
done it before) but this time I get a pop up that says, "Error no." and
that's it.  is this a bug?  What's up.  I would have thought it would
give me a little more info.

 

thanks

 

Scott

________________________________

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee,
you are hereby notified that you have received this communication in
error and that any use or reproduction of this email or its contents is
strictly prohibited and may be unlawful. If you have received this
communication in error, please notify us immediately by replying to this
message and deleting it from your computer. Thank you. 

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080625/fc8d9c1e/attachment.html>