[cisco-voip] increasing phone configuration speed on CCM6

[Wes Sisk]

consider:
in cm6.x all change notification is generated on the local node.  i.e.
1. insert on publisher
2. replicate to subscriber
3. change notifcation sent to phone

in CM4.x and earlier all applications read directly from the publisher 
so sequence is:
1. insert on publisher
2. change notifcation sent to phone
3. replicate to subscriber

On 6.x for the very first time in CM history any delays in replication 
actually do directly impact call processing and end devices.

/wes


Myers, Peter wrote:
> Hi,
>
> Having defragmented my CCM6 installation, I'm looking for a way to
> increase the speed at which the phone configures itself. This applies to
> both resetting the phone and also when I change a speed dial through a
> custom phone service I have written. Defragging has markedly improved
> AXL performance, but when I add a new speed dial through my phoneservice
> the phone still takes about a minute to load the new speed dial into the
> phonebutton, even though I can query AXL straight after and get the new
> speed dial info instantly. I've looked at several things in the system
> menu of CUCM administration and found something to do with DSCP for
> phone configuration precedence settings in Enterprise Parameters which
> sounds like it might be what I'm after, but I don't have a clue what it
> does and what effects it will have on the system/phone.
>
> Kind regards,
>
> Pete
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>