[cisco-voip] dial-peer destination pattern not matching even whenclearly matched...

[James Buchanan]

What is your hunt group comprised of? PRIs? Analog? Send that config
also.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Paul
Sent: Friday, June 27, 2008 10:23 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] dial-peer destination pattern not matching even
whenclearly matched...

rooter#sh dial-p voice sum
dial-peer hunt 0
             AD                                    PRE PASS
OUT
TAG    TYPE  MIN  OPER PREFIX    DEST-PATTERN      FER THRU SESS-TARGET
STAT PORT
1      pots  up   up             9[2-9]......       0
down trunkgroup HCMAnnex
2      pots  up   up   1         91[2-9]..[2-9]..-  0
down trunkgroup HCMAnnex
                                 ....
3      pots  up   up             9[49]11            0
down trunkgroup HCMAnnex


dial-peer voice 1 pots
 trunkgroup a
 description Local Call Dial-Peer
 destination-pattern 9[2-9]......
 incoming called-number .
 direct-inward-dial
!
dial-peer voice 2 pots
 trunkgroup a
 description Long-Distance Call Dial-Peer
 destination-pattern 91[2-9]..[2-9]......
 prefix 1
!
dial-peer voice 3 pots
 trunkgroup a
 description 411/911 Dial-Peer
 destination-pattern 9[49]11
 forward-digits 3

I have my dial-peer's outbound status as down and cannot even make any
outbound calls with 'csim start xxxxx'. Does this mean my trunk group is
down? None of my trunks or dial peers are shutdown. Can anybody explain
exactly how I can bring my dial peer outbound status to up?

Thanks,
Paul



      
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip