[cisco-voip] 6608 Blade

[Keith Klevenski]

You can also go to the Q931 Translator in Servicability and view one of the files in IOS format.  I belive you have to have the PRI trace and ISDN Translation trace running.  You can see all the Q931 debugs there for the 6608.  Not nearly as nice as IOS, but its something.
 
Keith

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Ed Leatherman
Sent: Sat 6/28/2008 8:22 PM
To: Noel Oquendo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 6608 Blade


Check out the tracy tool also:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a00803df803.shtml


On Fri, Jun 27, 2008 at 11:51 AM, Noel Oquendo <noquendo at veytec.com> wrote:


	Hey Guys, 
	What commands can I use to debug a PRI in a 6608 blade in a 6509 running CatOS? I want to verify incoming DNIS. 
	Thanks, 
	Noel 


	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	




-- 
Ed Leatherman
Senior Voice Engineer
West Virginia University
Telecommunications and Network Operations 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080628/9719ef28/attachment.html>