[cisco-voip] Enabling Auto Attendant

[Ryan West]

The easy way is from the web GUI; create a pilot number that forwards to the SIP address of the CUE module (just as was configured for VM), and configure the auto attendant through the web page.  If you need to enable a more advanced auto attendant, then you’ll need to install the CUE editor for your version of CUE and reference the aef file in your config.

The old method was to create a TCL script and reference that from the router.  Since you are using Unity Express 3.0, check this out:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_0/administration/guide/voicemail/5AAttnd.html

-ryan

From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Muhammad Ishaq Ahmed Khan
Sent: Monday, June 30, 2008 3:44 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Enabling Auto Attendant

I just want to know how to enable auto attendant cisco unity express 3.0 .

Muhammad Ishaq Ahmed Khan
Assistant Manager Implementation

ARWEN TECH (PVT) LTD.
37-G, Block 6, P.E.C.H.S.
Karachi – 75400,
Pakistan.

E-mail: ishaq.khan at arwentech.com<mailto:ishaq.khan at arwentech.com>
Mobile: 0092 – 345 – 201 96 09
UAN:  0092 – 21 – 111-37 – 37 – 37 Ext: 2425
Fax: 0092 – 21 – 455 – 8322
URL: www.arwentech.com<http://www.arwentech.com>
+6 GMT

Please note that neither ArwenTech Private Limited nor the sender accepts any responsibility for any viruses that may be
contained in this e-mail or its attachments, or any liability for errors or omissions in the contents of the message arising as
a result of email transmission. This message and any attachments are confidential. If you are not the intended recipient,
please inform the sender immediately, and delete this message and any attachment from your system. If you are not the
intended recipient, you must not copy this message or attachment or disclose the contents to any other person.


________________________________
Please note that neither ArwenTech Private Limited nor the sender accepts any responsibility for any viruses that may be
contained in this e-mail or its attachments, or any liability for errors or omissions in the contents of the message arising as
a result of email transmission. This message and any attachments are confidential. If you are not the intended recipient,
please inform the sender immediately, and delete this message and any attachment from your system. If you are not the
intended recipient, you must not copy this message or attachment or disclose the contents to any other person.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080630/79560721/attachment.html>