[cisco-voip] 0x82B2 - Requested facility not subscribed

[Frazee, Timothy]

Solved. I unchecked "Display IE Delivery" and "Redirecting Number IE
Delivery - Outbound".

 

This AT&T apparently rejected the call instead of dropping the info. My
IPC setup didn't have these fields populated, so UCM wasn't sending NAME
so AT&T wasn't rejecting the call.

 

 

 

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Frazee, Timothy
Sent: Thursday, October 02, 2008 9:53 AM
To: Philip Walenta; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 0x82B2 - Requested facility not subscribed

 

No VTA on the 7911 side. VTA on my side, but my IPC is not configured
for Video calls.

 

From: Philip Walenta [mailto:pwalenta at wi.rr.com] 
Sent: Thursday, October 02, 2008 6:47 AM
To: Frazee, Timothy; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] 0x82B2 - Requested facility not subscribed

 

By any chance does he have Unified Video Advantage running (I don't even
remember if UVA is supported on a 7911)?

 

Could you post a Q931 ISDN debug?

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Frazee, Timothy
Sent: Wednesday, October 01, 2008 4:02 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 0x82B2 - Requested facility not subscribed

Requested Facility Not Subscribed.

This cause indicates that the user has requested a supplementary service
which is implemented by the equipment which generated this cause, but
the user is not authorized to use.

I have an IP Communicator that is setup in the same location, device
pool, and CSS as a 7911 onsite. I have a single PRI thru a 2801 voice
router. The line on my IPC is shared with the line on the 7911. External
mask is also duplicated.

 

Everything that can be the exact same is.

 

My IPC can call everything I'd want to, but the local 7911 phone cannot.
(local phone gets a reorder tone) Q931 shows the Engineer is dialing it
correctly (its hitting the right dial peer)

 

I get the ISDN error code when he dials the call, but not when I dial
the call.

 

G.722 is turned off in the enterprise parameters and in the region
settings.

 

Any ideas?

 

Timothy Frazee 

Network Solutions

Automatic Data Processing, Inc.

 

 

________________________________

This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system. 

________________________________

This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended recipient
or an authorized representative of the intended recipient, you are
hereby notified that any dissemination of this communication is strictly
prohibited. If you have received this communication in error, please
notify us immediately by e-mail and delete the message and any
attachments from your system. 



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081003/a1bf9841/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 21285 bytes
Desc: image002.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081003/a1bf9841/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2092 bytes
Desc: image003.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20081003/a1bf9841/attachment-0001.jpe>